Beginner's Guide to Installing a New Shower Unit

Call Today

We've unearthed this great article on How to Install a Shower Enclosure below on the internet and thought it made perfect sense to relate it with you on this page.

An effective shower installation calls for mindful planning and also a lot of job. In most cases, you will certainly need to do 3 kinds of jobs: mounting wall surfaces, installing the plumbing, as well as ending up wall surfaces.

Prep work

First of all, you need to choose the sort of shower that you want to set up. It is very important to establish whether the picked shower is capable of managing particular systems and also can manage a secure degree of water via the central heating boiler. Many shower systems nowadays are made to be flexible to different water pressures (such as stored hot water and also cold mains).
It is likewise crucial to think about the water pressure as well as the preparation of the piping and drain for the shower

Different Types of Shower Units

Push-on Mixer: The pipe as well as spray parts of the push-on mixer shower unit can be linked to the bath faucet according to your demand, as well as the water temperature can be adjusted by means of the faucets. Push-on mixers are cheap and very simple to set up. However, although the pipe connection is easy, it is easily dislodged. Furthermore, it is inconvenient to adjust the temperature.

Bath/Shower Mixer: The pipe and spray of this type of shower are integrated with a bathroom mixer tap, and the temperature can be readjusted with the bath taps. It is a very affordable option as well as no added plumbing is involved. However, the bath/shower mixers also deal with bothersome temperature level control choices.

Guidebook Mixer: The hose and also spray of a manual mixer shower device are a part of the wall device and also the hot and cold water products are connected to a solitary valve The temperature level as well as pressure of the water are regulated through either one or a variety of knobs (in much more pricey showers). Although temperature control is much easier in manual mixer types, they are more costly than the previously stated mixers. They likewise require additional plumbing of hot and cold water system pipes.

Thermostatic Mixer: The pipe and also spray of this shower type are a part of the wall device and the cold and hot water materials are connected to a single valve right here too. It is full with a built-in stabiliser to self-adjust the water temperature and to stop it from ending up being too hot. Among the most significant benefits of a thermostatic mixer shower type consists of hassle-free temperature control. However, it is the most costly of the different mixer choices.

Power Shower: A power shower is a solitary unit having a powerful electrical pump that can altering both the water stress as well as temperature. This kind of shower can be fitted if there is water supply from a cold water cistern and also a hot water cyndrical tube. A power shower makes the change of both pressure and temperature level easy. On the other hand, it is unsuitable for water heated directly by the shower or where the water is provided by a combination central heating boiler under keys pressure.

Electric Shower: An electric shower is plumbed into a keys cold water supply as well as it heats the water electrically. It is important to keep in mind that for this shower kind to be installed, the keys pressure requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The device allows the temperature and also stress to be adjusted by means of a handle. Models with temperature level stabilisers are better as they stay unaffected by various other taps in other places in use within the household. A major drawback of electrical showers is that the control handle only allows for the option of high temperatures at much less stress, or lower temperature levels at a higher pressure. This is bothersome in the winter season when the spray is usually weak as well as the mains water is colder. Nonetheless, this issue is tackled in some versions which are readily available with a winter/summer setting.

Method

Depending on the sort of shower you wish to set up, the shower head must either be fitted in order to avoid its contact with the water in the bathroom below or the base tray, or it should have a check valve.
Prior to beginning, it is suggested to note the settings of the shower head and control, as well as to intend the pipe-work involved. Furthermore, the drain system to remove the waste water will certainly require to be intended. Both placements of the cord course and also the shower button will also need to be taken into consideration if an instant or electrical shower system is being installed.
Make use of the direction guide provided with the shower system to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is essential to remove the water. In order to shield the pipes, they need to be provided a water resistant covering as well as also fitted with isolating valves. The pipelines can then be hidden right into the wall surface as well as glued over to neaten the overall appearance.
Fit the base tray, shower head, and installations.
Link the primary shower control to the pipelines that will be providing the water (This might call for a female screw thread adapter).
Reconnect the supply of water and test the pipelines for any leakages, as some might require tightening up.
If you are mounting an electrical shower, remember to turn off the power supply prior to making any kind of electric connections. As soon as these connections have been made (there need to be support within the instruction manual), the power supply can be switched back on.

Readjusting Water Pressure to Suit Your Shower

The cold water storage tank can be lifted to a greater height (occasionally just 150mm (6inches)) by fitting a solid wood support underneath it - potentially made up of struts as well as blockboards. If you choose this alternative, the main and also distribution pipes will likewise have to be raised to satisfy the brand-new elevation of the tank.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is picked, it has to be attached right into the power supply in order to operate.

Piping and also Drainage

It is best to make use of 15mm diameter supply pipelines, and make the go to the shower as short as well as straight as feasible so as to preserve maximum stress and minimise warm loss. Furthermore, by reducing making use of arm joints for pipe corners, you can decrease the resistance in the flow of the supply of water. You can accomplish this by flexing the pipes instead.

The Majority Of Typical Blunders

Breaking or ignoring neighborhood code restrictions.

Using pipelines that are also tiny.

Affixing copper to galvanized without using a brass or dielectric fitting in between the two.

Not utilizing tape or pipeline compound at threaded joints.

Not leveling your components when installing them.

Not installing an air gap filling for components.

Cutting supply stub outs also brief to set up the shutoff valves onto after the completed wall surface remains in place.

Not correctly lining up tubing into installations or quit valves. (Forcing the nut onto the compression ring at an angle when the tubes is at an angle will certainly cause a leak.).

When transforming the water back on in your home, constantly run the outside pipe shutoff or flush your toilets to hemorrhage dust and air from the lines. This debris can trigger issues in your sink taps as well as other plumbing trim.

Things You Need To Know About Shower Enclosure

Shower enclosures come in different designs, styles, functionalities and sizes. It gives the bathroom not only a nicer look but also convenience and practicality. If you are planning to renovate or improve your bathroom, considering a shower enclosure would surely be a great idea.

Choosing the best shower enclosure

Give high consideration to the glass. Make sure that the glass is thick enough to not break easily. Also, you may want to consider glass that has an easy to clean film for easier maintenance.

Self-closing or magnetic door is recommended to ensure that water leaks are prevented outside the cubicle.

To achieve a seamless finish, consider an installation that is hidden and invisible.

Bi-fold or sliding door have high quality and durable rollers for durability and enjoy smooth glide for a long time. Plastic rollers are not recommended as most of the time, they need to be replaced often

Choose a design that would perfectly match your bathroom theme. There are tons of designs, colors and styles to choose from in the market, hence finding the one that would match your bathroom, is not hard.

Different types of Shower Enclosure

Quadrant enclosures: This enclosure type is curved and made to fit corners of the bathroom.

Pivot shower door: This on the other hand, opens into your bathroom.

Bi-fold shower door: This saves space as it is opened inwards.

Sliding shower door: This is, most of the time, large and perfect to replace the bathtub walls.

Steam shower cabin: If you have money to spare and would love to enjoy your shower more, steam shower cabin is perfect for you. It offers the relaxation you can get from a sauna plus the convenience of an enclosure

Walk-in shower: If you want a larger space when taking a bath, a walk-in shower is the perfect option for you

https://hindware.com/blog/things-you-need-to-know-about-shower-enclosure/

Do you enjoy reading up on How to Install a Freestand? Give feedback directly below. We'd be pleased to listen to your feelings about this piece. Hoping that you come back again soon. Don't hesitate to take a moment to distribute this blog entry if you liked it. Many thanks for taking the time to read it.

Get A Free Quote